1. Training
  2. Weatherization training
  3. Blower Door Diagnostics
Training · Weatherization training

Blower Door Diagnostics

Most weatherization professionals know how to run a blower door test. Far fewer know how to use it to actually find where a building is leaking — and make confident, defensible decisions about what to do next.

This course teaches energy auditors and weatherization technicians how to go from recording CFM50 results to reading the full picture of how a building is moving air, where the major bypasses are hiding, and what the pressure data is telling you to do about it.

  • In person
  • Intermediate level
  • 12 hours
blower door and duct testing

Who is this class intended for?

This course is designed for energy auditors and weatherization crew technicians who already know how to run a blower door test and want to develop stronger diagnostic skills.

Are there any prerequisites?

Yes — this course assumes familiarity with basic blower door setup and operation. Participants who have completed a basic blower door or weatherization fundamentals course will be well-positioned for this material.

Why take blower door diagnostic tool training

Benefits of Blower Door Diagnostic Tool Certification

Most weatherization professionals know how to run a blower door test. Far fewer know how to use it to actually hunt down where a building is leaking — and make confident, defensible decisions about what to do next. This course closes that gap.

  • Find the Leaks That Matter Most

    Learn to use pressure differentials to locate hidden air pathways — top plates, plumbing chases, balloon framing, dropped soffits, rim joists, and crawlspace connections.

  • Understand What Zonal Pressure Readings Mean

    Apply the Rule of 50 and the Half-Pressure Rule to determine whether an attic, crawlspace, garage, or mechanical space is behaving like inside, outside, or something in between.

  • Verify What You Find with the Right Tools

    Use chemical smoke, theatrical fog, infrared cameras, and pressure pans under blower door load to confirm air movement and duct leakage — then document findings in a way that supports clear crew direction and stands up to QCI review.

An instructor and a trainee inspecting a furnace and ductwork
How it works

How to Complete the Blower Door Diagnostic Tool Certification

You can get the Blower Door as a Diagnostic Tool Certification in just three steps!

  1. Step 1

    Take Our Course

    Day 1 covers pressure boundaries, safety considerations, manometer fundamentals, and a full introduction to zonal pressure diagnostics.

  2. Step 2

    Apply Learned Skills

    You'll use smoke, fog, infrared cameras, and pressure pans under blower door load to identify and confirm air leakage and duct connections to unconditioned spaces — then document your findings and interpret what they mean for the scope of work.

  3. Step 3

    Earn Your Certificate

    Complete the knowledge check and course assessment. Finish the course and receive your Everblue Certificate of Completion.

Topics

Get 6 Months Access

To help you prepare for your certification exams, we provide 6 months access to our secure online learning portal.

  • 01Thinking in Pressure Boundaries
  • 02Safety and Pre-Test Considerations
  • 03Manometer Fundamentals
  • 04Introduction to Zonal Pressure Diagnostics/span>
  • 05Hunting the Bypass — Guided Practical
  • 06Pressure Pan Testing
Trainees setting up a blower door in a doorway during hands-on field training
A trainee checking the seal around a window during a pressure test
"I thought I knew how to use a blower door. This course showed me I was only using about half of what it can do. The zonal diagnostics module alone changed how I write every scope of work.
Justin Nelson
An Everblue instructor leading a class in the training room
Enrolling a team?

We also offer corporate training

Schedule when it’s convenient for your team, and we’ll conduct training at your location.

  • Onsite or remote
  • Flexible course scheduling
  • Pre-paid vouchers and coupon codes available
FAQ

Quick Answers to Your Blower Door Diagnostics Questions

Call us today, and we’ll find a course to fit your goal. Call us

An Everblue training room, set up for a class
Where exactly will the course take place?

This is an in-person course. Training location and scheduling details will be confirmed at registration.

What do I receive upon completing the course?

Participants who complete all course requirements receive an Everblue Certificate of Completion. You'll also have access to recorded video and online resources to support your continued learning.

Can my organization schedule a group session?

Yes. Everblue offers group training solutions for organizations that need to train a team. Contact us to discuss scheduling, location options, and pricing for group enrollment.

Ready when you are

If you’re ready to learn, you’re ready to achieve.

And we’re here to help you. Call us today, and we’ll find a course to fit your goal.